© Pipe Solutions and Home Inspections 2018 With the modern series of Hydrolux  equipment HL5000 and HL500, you can find leaks particularly quickly, easily and reliably. The equipment uses modern digital signal processing technology (DSP) to clearly recognise the leak sound, even when there is a lot of noise in the environment. The sounds are not just perceived audibly, but are also displayed graphically using ultra-modern dual segment analysis (DSA) technology. For the client this means more reliability when locating water losses. The Correlux C-3 correlator locates leaks in drinking water pipes. Pressurized water at the leak location creates a noise which travels out in all directions of the pipe. This noise is recorded, amplified and sent wirelessly to the correlator by two sensors (piezo microphone, hydrophone) which are attached to the pipe (e.g. valve,  hydrants). The Correlux C-3 compares both signals (correlation) and calculates the exact distance to the leakage on the basis of the delay time of the signals, the sensor spacing and the sound velocity in the pipe. The RSP-3 is a plastic pipe locator with an impulse generator to eliminate pipe damage. The RSP-3 system is fast and easy to set-up. The RSP-3 device generates a mechanical sound to the non- metallic water line without interrupting the water service. Pipe Solutions uses the state of the art leak detection equipment. We have the knowledge, expertise and experience to map and/or detect the tiniest leak to the most massive leak with exactness and precision. Click Image to Enlarge Click Image to Enlarge Click Image to Enlarge Website Created by: Amazing-Admen Marketing - Ft. Lauderdale, FL